Dremel

I’ve always wanted a Dremel rotary tool but I never had a reason to get one until last night. Awhile back one of my external hard drives died so yesterday I decided instead of getting another external drive I would just swap the damaged drive from inside the case with a new one. I passed by Hawalli, picked up a 500GB SATA drive for KD34 and when I came back and tried installing it into the case I realized I had a problem. The hard drive I got used a different power adapter than the hard drive I was replacing which I was able to solve by using an adapter, problem is the adapter was too big to fit into the case. I needed to cut away some of the plastic to be able to fit the drive so I saw this as an opportunity to finally get a Dremel tool.

I passed by the Dremel dealer today and got myself a Dremel 300 Series Multi Tool and Flexshaft. It came with 55 accessories which will allow me to use the Dremel to engrave, carve, sharpen, grind, clean, polish, cut and sand. I paid KD22 after discount for this set, there was a cheaper set without the Flexshaft and only 25 accessories for KD16 but I figured I might as well get the better one while I am at it.

Once I got back home I used the Dremel tool on the plastic hard drive case and it worked like a charm. I was able to cut through the thick plastic with very very little trouble. Now my drive is working perfectly although I have a hole in the side. If you are interested in a Dremel tool they sell them at Ace Hardware but the prices at the dealer are cheaper. The dealer is located in Shuwaikh and their phone number is 4810844.

I got some pictures of the hard drive case mod which you can check by clicking on continue.

My hard drive was a Western Digital 500GB MyBook.